[CR]WAS: UPDTAE - Was: New member intro - hello!


Example: Production Builders:Tonard

From: "Arie Litman" <alitman@litman.com>
To: "'C.R. List'" <classicrendezvous@bikelist.org>
Date: Wed, 30 Jun 2004 13:49:54 -0700
Thread-Index: AcRLmtaPCzQYbfQaRJScxJHd6jCp+ATRzpTA
In-Reply-To: <003f01c44b9a$a837ea20$e64efea9@oemcomputer>
Subject: [CR]WAS: UPDTAE - Was: New member intro - hello!

Hi List Members..

I lurk here a lot, I enjoy the reading (and the picture) but posted only twice. I told you that I have ordered a custom bike, and although it is not a real classic (i.e. old), it is "retro" and comes close to being a classic.

Please ignore the modern components and enjoy the pictures...

http://www.litman.com/bikes/new%20bike.jpg http://www.litman.com/bikes/seat%20clamp.jpg http://www.litman.com/bikes/new%20bike%20decals.jpg http://www.litman.com/bikes/new%20bike%20initials.jpg http://www.litman.com/bikes/new%20bike%20seatpost.jpg http://www.litman.com/bikes/rear%20dropout.jpg

If you want to see some raw frame pictures as it was built visit http://www.litman.com/bikes/eisentraut.htm Arie Litman Sunnyvale Ca.

-----Original Message----- From: classicrendezvous-bounces@bikelist.org [mailto:classicrendezvous-bounces@bikelist.org] On Behalf Of Raoul Delmare Sent: Sunday, June 06, 2004 00:48 To: C.R. List; Bruce C. Subject: Re: [CR]UPDTAE, Was: New member intro - hello!

CONGRATULATIONS !!!!!!

Mr. Albert Eisentraut , ahhhhh yes , I remember when we ALL just KNEW that he was making the absolute finest bicycle frames made in North America . . .

We didn't realize how many other folks there were , or were about to be , building beautiful bicycles out there . . .

These days I know much better than to try to say anyone is THE best . . .

But that is still a big heavy name to drop in a conversation . . .

Congratulations !

:^)
Raoul Delmare
Marysville Kansas


----- Original Message -----
From: "Arie Litman"
To:
Sent: Saturday, June 05, 2004 11:19 PM
Subject: [CR]UPDTAE, Was: New member intro - hello!



>
> Hi,
>
> Just a follow up on my last post here (April 29, see below)
>
> I got a picture of my bike "in progress" it is almost a bike
> http://www.litman.com/bikes/eisentraut%20RawFrameMed.jpg
>
>
> I will post some more pictures when the bike is painted and built up..
>
>
> Arie Litman
> Sunnyvale Ca.
>
>
>
>
>
> -----Original Message-----
> From: classicrendezvous-bounces@bikelist.org
> [mailto:classicrendezvous-bounces@bikelist.org] On Behalf Of Arie Litman
> Sent: Thursday, April 29, 2004 14:09
> To: classicrendezvous@bikelist.org
> Subject: [CR]New member intro - hello!
>
> Hi,
>
> I joined this list today after reading archive for a while, and I think I'm
> in the right place.
>
> I am riding bikes all my life (well, with a 30 years gap in the middle) but
> riding on lightweights I only started only 4 years ago.
> today I am riding a '01 Giant OCR-1 which is an aluminum (gasp!) bike. But
> before you tell me to go away, please read on.
>
> This past Easter I met (through a common friend) Albert Eisentraut and we
> had a chance to socialize and talk about everything including bikes.
> make a long story short, a week later I was at his shop being measured for a
> new Eisentraut bike. He measured me, and my current bike, and watched me
> ride it, and interviewed me about my riding habits, and then told be to go
> away and come back in two and a half months.
>
> Albert will make the frame, paint it (Solid Yellow), and build it for me
> with Campagnolo Centaur 10s (Gray)... I am so excited, I could wet my
> pants..
> Albert promised he'll take pictures of the frame as it is being built, and I
> will work with him to build up the bike once the paint is cured..
>
> As I get the pictures I will post those here... Man! I can't wait!..
>
>
> Arie