RE: [CR]E-Bay early Carlsbad frame...a steerer too short...a solution?

(Example: Framebuilding:Restoration)

From: "Thomas R. Adams, Jr." <kctommy@msn.com>
To: classicrendezvous@bikelist.org
Subject: RE: [CR]E-Bay early Carlsbad frame...a steerer too short...a solution?
Date: Thu, 09 Sep 2004 13:37:52 +0000


Hmmm, that might also be a solution for ruined threads, JIS forks or people tired of looking for french headsets, all without having to get the fork repainted. How far up the steerer is the joint? Was there any damage to the paint? Did the fix require an internal sleeve to hold things together while being welded? Weight might go up a hair, but all in all, an excellent "field expedient" fix.

Tom (why didn't I think of that?) Adams, Shrewsbury NJ


>From: "Tom Sanders" <tsan7759142@comcast.net>
>Reply-To: Tom Sanders <tsan7759142@comcast.net>
>To: <classicrendezvous@bikelist.org>
>Subject: [CR]E-Bay early Carlsbad frame...a steerer too short...a solution?
>Date: Thu, 9 Sep 2004 08:50:54 -0400
>
>I have been following this discussion with considerable interest. I was taken by the comments on the difficulties posed by the steerer being cut too short. Apparently very difficult to replace.
>I bought a beautiful bike built for a bike show by Ton Ritchey a few years ago. Custom paint, a special twin plate fork crown...great bike. However, someone had cut the steerer way too short. Replacing the fork was out of the question, as it had the custom paint, too, and this wonderful fork crown (write for a picture if interested). The Chris King headset I had bought would not nearly go on the bike. I got my head together with my buddy Bill, my favorite mechanic, and we sent out to visit a local retired custom motorcycle builder of some note.
>This elderly gentleman cut my steerer and welded in a length of round stock the same size and ground it off beautifully. A gorgeous bit of workmanship for which he charged me $40. The bike went together beautifully and has performed flawlessly for years since.
>If the steerer on this Masi is replaced, it will not be original, anyway. Why not put an extension into it, instead? Seems like less work to me.
>Tom Sanders
>Lansing, Mi
>


>_______________________________________________
>Classicrendezvous mailing list
>Classicrendezvous@bikelist.org
>http://www.bikelist.org/mailman/listinfo/classicrendezvous

_______________________________________________ Classicrendezvous mailing list Classicrendezvous@bikelist.org http://www.bikelist.org/mailman/listinfo/classicrendezvous