Re: [CR]50th Campagnolo hub q/r lever locknut......

(Example: Framebuilders:Mario Confente)

From: "renaissance-cycles" <info@renaissance-cycles.com>
To: "Kurt Sperry" <haxixe@gmail.com>, "Wayne Davidson" <wayne.collect@xtra.co.nz>
References: <20040918100448.UIRO22901.mta2-rme.xtra.co.nz@219.88.0.215> <75d04b480409181039f05ecd6@mail.gmail.com>
Subject: Re: [CR]50th Campagnolo hub q/r lever locknut......
Date: Sat, 9 Mar 2002 06:28:56 -0800
cc: CR BIKE LIST <classicrendezvous@bikelist.org>

Nyloc type nuts are on the very late run of the NR / SR period stuff, we have lots of them on NOS QRs!

Dome nuts did come with 2 types of finish, for sure the early ones were unfinished, non plated. Newer ones, not sure of the finish but seem to be better than the older ones.

BC Baron C........And the gang!!.......With 5 Snap-on type rollaways filled with Campagnolo small parts. Renaissance cycles, Eindhoven Holland


----- Original Message -----
From: Kurt Sperry
To: Wayne Davidson
Cc: CR BIKE LIST
Sent: Saturday, September 18, 2004 9:39 AM
Subject: Re: [CR]50th Campagnolo hub q/r lever locknut......



> By this I'm assuming you mean the nut securing the lever with the cam
> to the "shell". I've never seen a nyloc there, only the usual acorn
> aka dome nut. Were these nuts ever plated? All of mine have gone
> dull in no time.
>
> Kurt Sperry
> Bellingham WA
>
>
>
> > Hi all, is this nut a nyloc nut or a domenut, I have a pic that seems to
> > show a domenut, mine have nyloc nuts, thanx in advance........regards
> > wayne davidson Invers NZ......