Re: [CR]Mixing SL, SR pedal axles.

(Example: Events:Cirque du Cyclisme:2002)

From: "Mike Schmidt" <mdschmidt@patmedia.net>
To: "Steven Willis" <smwillis@verizon.net>, <gpvb1@comcast.net>, <classicrendezvous@bikelist.org>
References: <092220041906.17923.4151CD2B00064042000046032200758942CE0D909F09@comcast.net> <002801c4a107$b16a6740$d9fd998d@t1s9z1>
Subject: Re: [CR]Mixing SL, SR pedal axles.
Date: Wed, 22 Sep 2004 18:27:15 -0400


Become?? HA! More like always been! Classic content: If it weren't for Steve packratiness, we would not have old stuff for our bikes.

Mike Schmidt
Stirling, NJ


----- Original Message -----
From: Steven Willis
To: gpvb1@comcast.net
Sent: Wednesday, September 22, 2004 8:53 PM
Subject: Re: [CR]Mixing SL, SR pedal axles.



> To make matters worse I think I have the SR races for the pedals. What a
> pack rat I have become.
> Steven Willis
> 1778 East Second Street
> Scotch Plains NJ 07076
> 908-322-3330
> http://www.thebikestand.com
> ----- Original Message -----
> From: <gpvb1@comcast.net>
> To: <classicrendezvous@bikelist.org>
> Sent: Wednesday, September 22, 2004 12:06 PM
> Subject: Re: [CR]Mixing SL, SR pedal axles.
>
>
> > The races that are pressed into the pedal bodies are different. # 4026 vs.
> # 672. (Late Gran Sport pedal bearing races are yet another part number...).
> > It's a pretty big job to switch all the required parts around. I've never
> been brave enough to try it (yet). Has anyone done it properly with success?
> If so, how did you pull the races without damaging them?
> > Greg Parker
> > Dexter, Michigan
> > Date: Wed, 22 Sep 2004 14:18:49 -0700
> > From: "Steven Willis" <smwillis@verizon.net>
> > To: "Jerome & Elizabeth Moos" <jerrymoos@sbcglobal.net>,
> > <classicrendezvous@bikelist.org>
> > Subject: Re: [CR]MIixing SL, SR pedal axles.
> >
> > Sorry I was always said it is a no fit.
> > Steven Willis
> > 1778 East Second Street
> > Scotch Plains NJ 07076
> > 908-322-3330
> > http://www.thebikestand.com
> > ----- Original Message -----
> > From: "Jerome & Elizabeth Moos" <jerrymoos@sbcglobal.net>
> > To: <classicrendezvous@bikelist.org>
> > Sent: Wednesday, September 22, 2004 11:02 AM
> > Subject: [CR]MIixing SL, SR pedal axles.
> >
> >
> > > Someone posted something about installing a steel axle in an SR or a Ti
> > axle in an SL this morning, but I deleted the emails and don't remember
> who
> > posted it. Would you please resend to me? I just received a beat pair of
> > SR pedals and am wondering about installing the Ti axles in some better SL
> > bodies. I don't remember if that is the same as you are trying to do or
> the
> > opposite.
> > >
> > > Regards,
> > >
> > > Jerry Moos