Re: [CR]Holdsworth Seat Post Binder Bolt Question

(Example: Framebuilders:Masi)

From: "Louis Schulman" <schulman1@verizon.net>
To: "skip sinatra" <skipsinatra@hotmail.com>, <classicrendezvous@bikelist.org>, <nkilgariff@yahoo.com>
Subject: Re: [CR]Holdsworth Seat Post Binder Bolt Question
Date: Thu, 4 Nov 2004 10:48:07 -0500


I have an 83 Holdsworth Professional which uses the same arrangement, but I have had no problems with the Allen head binder bold.

I would make sure the binder bolt isn't bent, and if it is, I would replace it with one made from hardened steel.

Louis
>
> From: "skip sinatra" <skipsinatra@hotmail.com>
> Date: 2004/11/04 Thu AM 10:21:39 EST
> To: classicrendezvous@bikelist.org, nkilgariff@yahoo.com
> Subject: [CR]Holdsworth Seat Post Binder Bolt Question
>
> I have a 1980 Holdsworth Pro and am wondering if anyone has encountered solved the seat post binder bolt issue? The frame looks like it needs a big bolt-nut assembly, but it came with the
> 5mm allen set-up. I have it tight but it appears to be deflecting the faces
> of the binderbolt lug. Is there a good alternative? I asked Norm K (the resident Holdsworth guru and he suggested I post to the list as he knew of no other solution. Thanks....
>

>

>

> Skip Sinatra

>

> Frog Level VA