[CR]Questions about CPSC and Campy

(Example: Framebuilders:Norman Taylor)

Comment: DomainKeys? See http://antispam.yahoo.com/domainkeys
Date: Wed, 1 Dec 2004 07:41:12 -0800 (PST)
From: "Tom Dalton" <tom_s_dalton@yahoo.com>
To: classicrendezvous@bikelist.org
Subject: [CR]Questions about CPSC and Campy

Someone brought up the interesting point about lower level groups not having the same features as those normally attributed to CPSC requirements on NR/SR. I'd say it is more accurate to say "later groups," becuase we again saw uncoated wheel guides on Triomphe and Victory brakes, and lip-less ft ders on C-record (though on not Victory as stated). Could it be that CPSC backed off on their regs? Or, it could be that Campy over-reacted to the CPSC requirements in 1978? After all, a lot of other brands retained lip-less ft. ders and uncoated wheel guides, didn't they? I really have to wonder if the CPSC mandate took a far more general form than Campy being told to add specific bits and pieces to the components. I remember hearing that the CPSC requirement was for something very general, like "no sharp protrusions." I have to wonder if the feds stepped in and pointed directly at the brake QR, ft der lip, etc., or if these changes reflect Campy's interpretation of the regs. If so, it would explain why other companies reacted differently, or didn't react.

Also, we should consider which of the changes at the commonly accepted CPSC timeframe of 1978 were truly made to address a new requirement. The often cited "plastic trumpety thingies" on the rear ders are probably not a CPSC thing. They are there to guide the screwdriver to the slot, as in whilst hanging out of a car window trying to get your rider's bike to reach the 13t cog. The curved QR too... that was around before CPSC, in the form of the block lettered curved handle. This goes way back according to The Timeline, and according to Chuck was a common cool-guy mod applied to flat QRs. It could be that Campy simply decided to start curving the road QR levers because the end users were doing it themselves. What really reinforces this idea in my mind is that Campy made these levers for a long time, but at some point added the "open" and "closed" markings on the outside and inside of the curves. Now *that* is almost certainly a CPSC change.

Tom Dalton Bethlehem, PA

Thanks to Chuck and Steven B in Vt.

__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com