Re: [CR]Harden Undrilled H/F hubs

(Example: History:Ted Ernst)

From: "ternst" <ternst1@cox.net>
To: <kohl57@starpower.net>, <raleighpro@dejazzd.com>, <classicrendezvous@bikelist.org>
References: <26000-22004125320144726@M2W056.mail2web.com>
Subject: Re: [CR]Harden Undrilled H/F hubs
Date: Fri, 3 Dec 2004 13:22:07 -0800
reply-type=original

I took another good look at the hubs . It looks on my screen as if some of the rear holes are drilled. Optical illusion ? tomatoes on my eyes? Anyhow, it 's no biggie to drill out and you already have champferd hole edges. Wish I had a period bike to hang em into. Ted Ernst


----- Original Message -----
From: kohl57@starpower.net
To: raleighpro@dejazzd.com
Sent: Friday, December 03, 2004 12:01 PM
Subject: Re: [CR]Harden Undrilled H/F hubs


Original Message: ----------------- From: Pete Geurds raleighpro@dejazzd.com Date: Fri, 3 Dec 2004 14:40:34 -0500 To: classicrendezvous@bikelist.org Subject: Re: [CR]Harden Undrilled H/F hubs


> I don't think that means forgot to drill them, just that they're undrilled. see: http://www.classicrendezvous.com/British/harden%20_2.htm

I've seen them undrilled before.

Pete Geurds Douglassville, Pa

Very interesting.. doubly so as the ad is for the Australian market where these hail from. eBay Australia is becoming a nice little source for choice goodies it seems. And reasonable shipping to Japan no doubt.

Harden hubs, drilled or undrilled, broiled or fried, are truly one of those Perfect Things that make a classic cycle, well, classic. The ones on my '48 RRA are one of the great joys of the machines. And these undrilled ones are especially pleasing, perfect specimens of form following function. And a wonderful foil to that silly (and mercifully shortlived) fad of drilling little holes in every single component in the early 1980s.

Peter Kohler Washington DC USA

--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .