[CR]Re: Classicrendezvous Digest, Vol 24, Issue 12


Example: Framebuilding:Paint
Date: Thu, 02 Dec 2004 11:49:19 -0800
From: "John Jorgensen" <designzero@earthlink.net>
To: classicrendezvous@bikelist.org
References: <MONKEYFOODyWtIIZS2T000011f0@monkeyfood.nt.phred.org>
x-mac-creator="4D4F5353"
Subject: [CR]Re: Classicrendezvous Digest, Vol 24, Issue 12

> John Siemsen inquired about applying cloth bar tape that has no adhesive & what kind of adhesive to use.
>
> Chuck Schmidt suggested Scotch™ 3M Spray Mount™ Artist's Adhesive from the local art store.
> And While you're there buy some Bestine® Rubber Cement Thinner to use for clean up.
>
>

While spray mount works, and Bestine is useful, blends markers well in addition, the MSDS (material data safety sheet) is not very friendly.

I now use a Scotch ATG gun and the acrylic adhesive tape made for same, one does not need the gun to apply just makes the job quicker. One will end up with an adhesive backed cloth tape with a peel off carrier similar to the Cinelli tape, no fumes to deal with and doesn not seem to move Also avail. at a good art store.

John Jorgensen
Palos Verdes Ca