Re: [CR]Re: re eBay Galli brake auction OMAS dodat Campagnolomodification...

(Example: Framebuilders:Alberto Masi)

Date: Sun, 05 Dec 2004 00:21:02 -0800
From: "Chuck Schmidt" <chuckschmidt@earthlink.net>
To: classicrendezvous@bikelist.org
Subject: Re: [CR]Re: re eBay Galli brake auction OMAS dodat Campagnolomodification...
References: <BDD90BF6.F80%wayne.collect@xtra.co.nz>


Wayne Davidson wrote:
>
> Chuck Schmidt wrote:
>
> > Before I found the OMAS piece I used to take the stock Campagnolo steel
> > adjuster, remove the thumb wheel and shorten the shaft to about 1/8"
> > long. I did this since it was so easy to adjust the brake shoe
> > clearance by loosing the cable pinch bolt with the T-wrench, squeezing
> > the caliper together by hand and then retightening the pinch bolt. Gave
> > the caliper a much cleaner look in my opinion.
> >
> > Chuck Schmidt
> > South Pasadena, Southern California
>
> Hi all, does anyone have a photo of this conversion, would be nice to see
> one on a bike instead of trying to envisage this. And or even the OMAS dodat
> that Chuck speaks about...regards wayne davidson Invers NZ........

The OMAS one appears on this Confente: http://www.velo-retro.com/VRendez.jpgs/Confente.jpg

Hard to see in the photo, but not much to see either. Just a small cup at the top for the housing to sit in and a shaft that goes into the hole at the end of the brake caliper arm. Imagine a Campagnolo brake adjuster made of aluminum and missing the threading and the thumb wheel adjuster.

For the one I modified from a stock steel Campagnolo adjuster reread the description in the first sentence. It couldn't be made simpler.

Chuck Schmidt South Pasadena, Southern California

.