Re: [CR]Cotter Pins and Directions...

Example: Production Builders:LeJeune

Date: Wed, 18 Feb 2004 20:03:03 -0700
From: Chuck Schmidt <>
Subject: Re: [CR]Cotter Pins and Directions...
References: <>

Harvey "high friction, low angle" Sachs wrote:
> If the cotters are properly filed, fitted, seated, and secured, I've not been able to convince myself that they care which end is up when the crank is pointing backwards.

The cotters care not in the least which end is up...

I care, however.

Chuck "aesthetics" Schmidt South Pasadena, Southern California