Re: [CR]Seatpost � for Reynolds 653.....

(Example: Framebuilding)

Date: Thu, 19 Feb 2004 04:34:49 GMT
To: wayne.collect@xtra.co.nz
Subject: Re: [CR]Seatpost � for Reynolds 653.....
From: <brianbaylis@juno.com>
cc: classicrendezvous@bikelist.org

Wayne,

A properly built frame made from Reynolds 653 tubing actually takes a 27.4mm seat post. I keep several 27.4mm seat posts around because lots of my personal small lighter frames require them. I also have frames built with Columbus KL and Columbus Record tubing that require 27.4mm seat posts.

Brian Baylis
La Mesa, CA


-- Wayne Davidson wrote:


Hi all, I have a frame with this tubing, the seattube seems to measure 27.0mm ø, is this right?........regards wayne davidson Invers NZ...... _______________________________________________ Classicrendezvous mailing list Classicrendezvous@bikelist.org http://www.bikelist.org/mailman/listinfo/classicrendezvou _______________________________________________ Classicrendezvous mailing list Classicrendezvous@bikelist.org http://www.bikelist.org/mailman/listinfo/classicrendezvous