Re: [CR]Woe is me


Example: Framebuilders
From: "Raoul Delmare" <Raoul.L.Delmare@worldnet.att.net>
To: "C.R. List" <classicrendezvous@bikelist.org>, "Bruce C." <BruceCumberland@comcast.net>
References: <000c01c44b00$4d6eb280$99fc0618@attbi.com>
Subject: Re: [CR]Woe is me
Date: Sat, 5 Jun 2004 08:53:46 -0500


every idea tossed out so far has had merit

( in my humble opinion )

( and I had about half of those ideas in my own head too )

but this one is my own personal favorite !

:^)
Raoul Delmare
Marysville Kansas


----- Original Message -----
From: Jim McCoin
To: classicrendezvous@bikelist.org
Sent: Saturday, June 05, 2004 8:23 AM
Subject: [CR]Woe is me


I have a simple solution to the issue. For years TA built a small front rack, the rack was mounted on the pivot bolts and the mounting bolt. A simple arch with a cable stop at the top and washers to fit under the pivot bolts, the arch must be tall enough to clear the cable yoke.

This is a lot like the stiffener on mountain bike forks, if I can say the words on this list. A good fabricator could build one in about an hour.

Jim McCoin, yes I am a fabricator.

Fremont Ca