Re: [CR]Pedal identifcation, please:

(Example: Production Builders:LeJeune)

Date: Sat, 14 Aug 2004 19:31:51 -0400
From: "Joe Bender-Zanoni" <joebz@optonline.net>
Subject: Re: [CR]Pedal identifcation, please:
To: Tom Hayes <hayesbikes@nls.net>, classicrendezvous@bikelist.org
References: <002701c482e6$487606c0$6c0890d8@computer>


Just a guess but these might be the Bob Reedy pedals that Suntour copied. If so, a great collectable of machine shop type American components.

Joe Bender-Zanoni
Great Notch, NJ


----- Original Message -----
From: Tom Hayes
To: classicrendezvous@bikelist.org
Sent: Sunday, August 15, 2004 12:37 PM
Subject: [CR]Pedal identifcation, please:



> I have set a pedals without markings on them, that might be out of our time line, but I would like help in identifying. They appear similar to MKS or Suntour pedals (they have removable and perhaps replaceable cages-black). They have sealed bearings, with the following markings: "Genbearingco R-B". The body of the pedal is shaped like an "H" but with arches for each side. The spindle length from the body to the beginning of the threads seems and appears long: 36 mm, and to the end of the threads, 46 mm from the body to end of the threads. The spindle may be titanium (how does one tell other than it being non-magnetic?). The outside bearing is held with a hex bolt.
>
> For the truly interested, I could provide jpegs.
>
> Thank you.
>
> Tom Hayes
> Chagrin Falls, Ohio