Mark Stonich wrote:
> I had a CNC shop make me a batch of fixed cup tools for Raleigh 3
> speeds. These are often on so tight that I have to put a 20" long
> wrench on the tool and beat on the other end with a wooden mallet to
> remove them. Threaded rod based tools that usually worked on
> lightweights were worthless on 3 speeds. I think the threads are
> tapered and they must have been installed with impact drivers.
>
> Pix at;
> http://bikesmithdesign.com/
Interesting. It probably wouldn't be too much trouble to have them put a groove in the jaw so it could fit the Campy tool many shops already own:
http://www.os2.dhs.org/
--
-John Thompson (john@os2.dhs.org)
Appleton WI USA