RE: [CR]Handle Bar tape

(Example: Framebuilding:Restoration)

content-class: urn:content-classes:message
Subject: RE: [CR]Handle Bar tape
Date: Tue, 15 Mar 2005 14:07:10 -0800
Thread-Topic: [CR]Handle Bar tape
Thread-Index: AcUpqKXsHCp8zU+LTdOD9BdkLSymMwAAiNkg
From: "George Argiris" <George.Argiris@mitchell.com>
To: "Doug Smith" <doug@kingsweir.plus.com>, <classicrendezvous@bikelist.org>


Also, may I add, I like to over lap about 1/4 on the drops, and about 1/2 up on top. Since I'm not on the drops that much. This gives me less chance of that dreaded separation going on. It also assures that I'll have enough tape at the top.

george argiris san diego,ca

-----Original Message----- From: classicrendezvous-bounces@bikelist.org [mailto:classicrendezvous-bounces@bikelist.org] On Behalf Of Doug Smith Sent: Tuesday, March 15, 2005 1:48 PM To: classicrendezvous@bikelist.org Subject: [CR]Handle Bar tape

Tom You have already received some very sensible advice on how to administer

plastic tape on his bars. All the methods are worth a try but one small

item I would advise is whilst pulling the tape around the bar, grip it tight with the other hand and twist it firmly in the same direction thus giving the material an extra chance to "bed" in.

I have always used the same method , wrap anticlockwise in the direction

of any movement whilst riding, starting at stem to bar end and tuck in the surplusto be held firmly with bar end plugs .I have never experienced any problems using this format.

Good luck

Doug.Smith
North Dorset
UK