Re: [CR]Campy qr to track swap

(Example: Framebuilders:Norman Taylor)

From: "Ken Sanford" <kanford@comcast.net>
To: "rallydeath" <fourrings3@gmail.com>, <classicrendezvous@bikelist.org>
References: <6338376705050617562e0c0947@mail.gmail.com>
Subject: Re: [CR]Campy qr to track swap
Date: Fri, 6 May 2005 22:04:49 -0400
reply-type=original

Brad

Campy did not ever (to my knowledge) ever make a 17 tooth cog. They (like Dura Ace) and some others only made as large as 16.

Ken Sanford
Kensington, MD

----- Original Message -----
From: rallydeath
To: classicrendezvous@bikelist.org
Sent: Friday, May 06, 2005 8:56 PM
Subject: [CR]Campy qr to track swap

Hi all,

I was wondering if all qr 70's campy hubs can be switched to track axle's. More than likely this is a newbie question, but what can I say. I've got 36 hole hi-flange record hubs, with a 6 speed on the back which a want to redish to fixed gear. And I saw a set of old track axles on ebay to help with my conversion. Could these be track legal after the swap? Also I'm looking for an old Campy 16 or 17 tooth track cog. Please let me know if more info is needed, as I'm a newbie.

Cheers! Brad Kremer PDX OR 70's Libertas hopefully soon 70's set guys and girls Varsity's