[CR]Re: [Frame] fork crown

(Example: Production Builders:Pogliaghi)

From: "Anthony Mezzatesta" <mezzbike1@zoominternet.net>
To: <davebohm@cox.net>, <framebuilders@phred.org>, <classicrendezvous@bikelist.org>
References: <20050526143119.GCGT12158.fed1rmmtao11.cox.net@smtp.west.cox.net>
Date: Thu, 26 May 2005 18:06:27 -0400
Subject: [CR]Re: [Frame] fork crown

Hey Dave,
      I did make one out of flat plate and 1" tubes it looked better than the original the problem is the alignment. if I can't find a fresh one I will try again. Thanks for the input. God bless Anthony Mezzatesta Mezzatesta Custom Cycles 914 Berkley Manor Dr. Cranberry Twp. PA.16066 h 724 498 4191 c 917 214 9229 mezzbike1@zoominternet.net


----- Original Message -----
From: davebohm@cox.net
To: Anthony Mezzatesta


<framebuilders@phred.org>; <classicrendezvous@bikelist.org> Sent: Thursday, May 26, 2005 10:31 AM Subject: Re: [Frame] fork crown


> no man,
>
> I could make that with a little time though. That is what I would do if I was you.
>
> Dave Bohm
> Bohemian
> >
> > From: "Anthony Mezzatesta" <mezzbike1@zoominternet.net>
> > Date: 2005/05/26 Thu AM 09:11:35 EDT
> > To: <framebuilders@phred.org>, <classicrendezvous@bikelist.org>
> > Subject: [Frame] fork crown
> >
> >
> >
> >
> >
> >
> >
> >
> > Hey Gang,
> >
> >
> > Does any one know where I can get a crown like the one on the link
> > below.
> > http://pg.photos.yahoo.com/ph/bigmezz2/album?.dir=/a51d&.src=ph&.tokph5c.CDB fgloCrdM
> > sorry for the cross messaging.
> > Anthony Mezzatesta
> > Mezzatesta Custom Cycles
> > 914 Berkley Manor Dr.
> > Cranberry Twp. PA.16066
> > h 724 498 4191
> > c 917 214 9229
> > mezzbike1@zoominternet.net
> >
> >
> > _______________________________________________
> > Subscribe/unsubscribe or retrieve password at:
> > http://www.phred.org/mailman/listinfo/framebuilders
> > Archives: http://www.phred.org/pipermail/framebuilders/
> > Archive Search: http://search.bikelist.org/