<< Hi Dale it looks like a Nitto to me. Look at the steel triangle nut that holds the bar binder bolt.>>
Ah ha! Aye, you have a sharp eye, mate! Good work, Steve!
Dale Brown Greensboro, NC US
-----Original Message----- From: Verizon <smwillis@verizon.net> To: OROBOYZ@aol.com; classicrendezvous@bikelist.org Sent: Fri, 29 Jul 2005 06:05:36 -0700 Subject: Re: [CR]Re: Cuevas pics & warning....
Hi Dale it looks like a Nitto to me. Look at the steel triangle nut that holds the bar binder bolt. Steven Steven Willis 1778 East Second Street Scotch Plains NJ 07076 908-322-3330 http://www.thebikestand.com ----- Original Message ----- From: <OROBOYZ@aol.com> To: <classicrendezvous@bikelist.org> Sent: Thursday, July 28, 2005 9:04 PM Subject: [CR]Re: Cuevas pics & warning....
> In a message dated 7/28/2005 10:35:11 PM Eastern Daylight Time,
> dgranger@comcast.net writes:
>
> << http://homepage.mac.com/
>
> WARNING Jose!!!
> If that's not a Nitto stem, and is in fact a Cinelli as it appears
to me,
> then it is dangerously too high, too far out of the fork. Not only
is the > rider
> at risk, but the expander is up there in that threaded section of
the > steerer
> and is likely to ruin the fork!
>
> Dale
>
> Dale Brown
> Greensboro, NC USA
> _______________________________________________
> Classicrendezvous mailing list
> Classicrendezvous@bikelist.org
> http://www.bikelist.org/