Re: [CR]Tie and solder question

(Example: Racing:Jean Robic)

Date: Fri, 05 Aug 2005 16:25:21 -0700
From: "Steven Willis" <smwillis@verizon.net>
Subject: Re: [CR]Tie and solder question
To: "Doug Van Cleve" <dvancleve@cox.net>, <classicrendezvous@bikelist.org>
References: <000101c599dc$c21184b0$7a7ba8c0@laptophome>
reply-type=original

Yes just use any brass wire and house hold solder and it works fine. Steven Steven Willis 1778 East Second Street Scotch Plains NJ 07076 908-322-3330 http://www.thebikestand.com

----- Original Message -----
From: Doug Van Cleve
To: classicrendezvous@bikelist.org
Sent: Friday, August 05, 2005 9:43 AM
Subject: [CR]Tie and solder question

> Howdy folks.
>
> I want to try tying and soldering a rear wheel that is kinda beat (for
> practice). I know that DT sells wire and solder, but it is pricey. Are
> there suitable items available from say Home Depot? I don't want to spend
> the moolah on the DT stuff and I don't need 100+ yards of the wire...
>
> Thanks,
>
> Doug "don't care whether it makes sense or not" Van Cleve
> Chandler, AZ