> has raised a concern about the brake bridge. It appears that it has
> been drilled for a recessed brakeset and in the process material has
> been removed from the bridge. It appears to me this is not too bad and
> is probably easily repairable. I would think a tube and some brazing
> would eliminate any strength problems.I am assuming the under side is
> similar.
> What say you? Thanks.
Impossible to tell at a distance. I can only add that, contrary to someone else' cautionary warning, I recently enlarged the hole for the recessed nut (from 6 to 8mm, using an 'angular drill') on an old Fanini frame. Success!
Sergio