[CR]Re: Splined BBs from the 70s?

(Example: Production Builders:Peugeot:PY-10)

Date: Fri, 2 Dec 2005 23:20:05 -0700
From: "Doug Van Cleve" <dvancleve@gmail.com>
To: "classicrendezvous@bikelist.org" <classicrendezvous@bikelist.org>
In-Reply-To: <954702dd0511281504v3c3bc837m794acc034753ff3b@mail.gmail.com>
References: <954702dd0511271435n1c4b2c28n9183d5fa13315065@mail.gmail.com>
Subject: [CR]Re: Splined BBs from the 70s?

Well folks,

Anyone guessing Phil Wood was correct :^) I found my Phil tool and sure enough it fits. Now to loosen up the crud holding in the cups...

Thanks,

Doug Van Cleve Chandler, AZ

On 11/28/05, Doug Van Cleve <dvancleve@gmail.com> wrote:
>
> Folks,
>
> I should probably have mentioned that this donor bike has/had full Campy
> N-R except for the hubs (Normandy Luxe Competition high flange) and this
> BB. I would therefore have assumed that the BB was considered to be bett er
> than the Campy I was expecting to see there.
>
> Doug Van Cleve
> Chandler, AZ
>
>
> On 11/27/05, Doug Van Cleve <dvancleve@gmail.com> wrote:
> >
> > Howdy folks.
> >
> > I picked up a parts donor bike to build up the Silk Hope I get through
> > Dale and it has some kind of splined BB that appears to be original. I t
> > doesn't use the current Shimano splined tool and doesn't look like Phil
> > Wood either. I can't find my Phil BB tools, but I recall them being so rt of
> > rounded/scalloped and this one has thin square notches more like a Shim ano.
> > Any ideas on what it might be and what kind of tool will remove it?
> >
> > Thanks :^)
> >
> > Doug Van Cleve
> > Chandler, AZ