Re: [CR]Ava stem tightener Q...

Date: Tue, 3 Jan 2006 06:21:49 -0800 (PST)
From: Fred Rafael Rednor <>
Subject: Re: [CR]Ava stem tightener Q...
In-Reply-To: <>

     It's 7mm. You can get hex keys in that size from Sears - either in the store or on-line. If for some reason you want to get fancy, you can also get them from Snap-On, Facom or SK. Those would be hex keys or hex bit drivers for a 3/8 inch ratchet wrench.
     By the way, the old British system of bolt/nut measurements is Whitworth. :-D
     Fred Rednor - Arlington, Virginia (USA)
> I've got an Ava stem with an English diameter and an
> allen head stem tightener nut. It is between an 8 and
> a 6 millimeter allen wrench sizes. My caliper measures
> it about 7mm. Where do you go to get a 7mm allen
> wrench? None of my hardware stores have them. Might
> this be some strange Wentworth standard size? Or is it
> likely just a 7mm size. It measure .3 inches in
> English.
> Don Wilson
> Los Olivos, CA
> D.C. Wilson
> -----------------------------------------------------------
> Note: This message may contain confidential and/or privileged
> information. If you are not the addressee or authorized to
> receive this for the addressee, you must not use, copy,
> disclose or take any action based on this message or any
> information herein. If you have received this message in
> error, please advise the sender immediately by reply e-mail
> and delete this message. Thank you for your cooperation.