[CR]Wanted: Phil Track Hub bolts

(Example: Events)

Date: Sun, 15 Jan 2006 14:31:48 -0500
From: "Harvey M Sachs" <sachshm@cox.net>
To: LouDeeter@aol.com, Classic Rendezvous <classicrendezvous@bikelist.org>
Subject: [CR]Wanted: Phil Track Hub bolts


Lou - I don't have experience specifically with the track hubs, but there are a couple of possibilities:

In my box of Phil spares there are fixing bolts in both 5/16" x 24 tpi, and 3/8" x 24 tpi. I think that these are both standard SAE NF (fine) threads. Respctively, these take 1/4" and 5/16" allen keys

I believe that the later ones may have been metric-threaded.

I'd wander down to the local hardware store and exclude the easy ones. Up in the attic there are some Phil hubs that are later, which I've always used with QR skewers. For you, I'll go up in the cold dark space, fetch the wheels, and try to see what if any bolts lying around fit them -- if one of these options doesn't work. :-)

harvey sachs mcLean va

Lou Deeter wrote: I'm in need of a set of bolts that screw into a Phil front hub to hold the fork in place. Please email off-list. Thanks. Lou Deeter, Orlando FL