RE: [CR]Mavic hub ID/help?

(Example: Production Builders:Frejus)

Content-class: urn:content-classes:message
Subject: RE: [CR]Mavic hub ID/help?
Date: Fri, 20 Jan 2006 09:25:04 -0500
Thread-Topic: [CR]Mavic hub ID/help?
Thread-Index: AcYdcq5D28aGbisuSl6Sy9U5tA9YDwAWFb1A
From: "Bingham, Wayne" <WBINGHAM@imf.org>
To: <classicrendezvous@bikelist.org>


Actually, I believe those are the RD 500 hubs, predecessor to the 501 model. Not much different really, but the first of that line. Interestingly, the set of wheels that were on my RIH had Mavic hubs that I believe were predecessor to the RD500s. They have "MAVIC" in block letters across the hub body, rather than the little cast-in oval seen here and common on the 500/501/520/etc.:

http://www.classicrendezvous.com/France/Mavic/Mavic_hubs1.htm

Don't have pix of the block-letter hubs at the moment. In fact, they are floating around Brian's shop somewhere right now.

Anyone know more about those and where they fit in the chronology of Mavic hubs? Not much on Mavic's web site.

Wayne Bingham Lovettsville VA

Derek,

These look to be standard Mavic 501 hubs. They are sealed. I don't think you can shift the axle. You can replace the axle with different sizes, but I think it's fixed left to right by design.

http://www.yellowjersey.org/MAVIC501.JPG

http://www.bikepro.com/arch_products/hubs/a-hubs-mavic.html

http://www.firstflightbikes.com/Mavic.htm

David -- David Bilenkey

Hi all,
>
> I'm working on reconstructing my vintage 1982 Ellis-Briggs #3 and have
> a question about its Mavic hubs.
>
> I posted a couple of pics on wool jersey:
>
> http://www.wooljersey.com/gallery/Champaign/DSCF1878
>
> http://www.wooljersey.com/gallery/Champaign/DSCF1875
>
> Does anyone recognize these? Are they sealed bearing, sealed, or
> regular?
>
> Is it possible to shift the axle in this kind of hub, so as to create
> a tad more freewheel-to-seatstay clearance (assuming a wheel
> retrue/rebuild as well)?
>
> TIA,
>
> ...Derek Davis Phoenix, AZ