RE: [CR]Real Regina freewheel remover


Date: Sat, 28 Jan 2006 20:55:22 -0800 (PST)
From: r cielec <teaat4p@yahoo.com>
Subject: RE: [CR]Real Regina freewheel remover
To: classicrendezvous@bikelist.org
In-Reply-To: <200601290425.k0T4PPKl026066@ms-smtp-03-eri0.southeast.rr.com>


Doesn't Bicycle Classics (Greg Parker) offer these?

Richard Cielec Chicago, Illinois

"Robert D. Dayton,Jr." <rdayton@carolina.rr.com> wrote: Park makes a FR-4 which is supposed to work with Regina. But when I've tried to use it the walls are a bit too thick to remove the freewheel w/o removing the the cone. Luckily I a very thin walled aluminum one that works. Rob Dayton Charlotte,NC USA

-----Original Message----- From: classicrendezvous-bounces@bikelist.org [mailto:classicrendezvous-bounces@bikelist.org] On Behalf Of scott Baxter Sent: Saturday, January 28, 2006 7:30 PM To: classicrendezvous@bikelist.org Subject: [CR]Real Regina freewheel remover

I bought a Regina freewheel, and found out that the Suntour 2 prong remover won't work. Park doesn't make a Regina remover. I thought I was screwed. I stumbled upon some Regina freewheel removers at A1 Bicycles in St. Louis, phone # (314) 821-0216. If you want an old-school Regina freewheel remover I'd call these folks up. I know at least one more is left. I've installed and removed the Regina freewheel at least 3 times today futzing with whether or not a 28 tooth cog will work with an old bronze body Gran Sport, and the remover functioned flawlessly.

Scott Baxter
St. Louis, MO