[CR]Was: 3ttt timeline. Now: taping options

(Example: Framebuilders:Doug Fattic)

To: classicrendezvous@bikelist.org
From: <marcus.e.helman@gm.com>
Date: Thu, 2 Feb 2006 09:47:26 -0500
Subject: [CR]Was: 3ttt timeline. Now: taping options

Chuck Schmidt wrote:

Charles, I've never had that problem but I always remove the brake levers from the bars and then run the handlebar tape completely around the clamp and then clamp the brake levers over the handlebar tape. Results in a _very_ clean appearance that way!

I have done this on occasion with cloth tape, but I have always wanted to know if it works with (off topic?) cork tape? Or will the edges of the brake lever body cut the tape?

Best regards,
Marcus Helman
Huntington Woods, MI