RE: [CR]who's a good choice for frame alignment?

(Example: Framebuilders:Tony Beek)

From: "Ken Freeeman" <freesound@comcast.net>
To: "'Aldo Ross'" <aldoross4@siscom.net>, <classicrendezvous@bikelist.org>
Subject: RE: [CR]who's a good choice for frame alignment?
Date: Thu, 9 Feb 2006 07:33:59 -0500
In-Reply-To: <000001c62d6f$113825f0$8b14fbd1@Newhouse>
Thread-Index: AcYtbx26J5pjAKrvTOajp71z1XRBugABWnfg


Aldo,

I've had alignment done at RRB Cycles in Kenilworth, Illinois (Ron Boi) lately, and I would try Doug Fattic in Niles, Michigan. That's not quite in your area, but I've been very surprised not to get more recommendations for the SE Michigan/Northern Ohio area, back when I looked.

Will you please share what you find? I fear this is a vanishing skill.

Way back in history I had alignment done at Schwab Cycles in Colorado.

Ken Freeman, Ann Arbor, MI

-----Original Message----- From: classicrendezvous-bounces@bikelist.org [mailto:classicrendezvous-bounces@bikelist.org] On Behalf Of Aldo Ross Sent: Wednesday, February 08, 2006 6:22 PM To: classicrendezvous@bikelist.org Subject: [CR]who's a good choice for frame alignment?

My "new" Legnano has a definite twist in the frameset i.e. the headtube and the seattube aren't in the same plane. I've been taking frames to Wheelie Fun in Lebanon, Ohio - they have Mike Melton's old frame table - but we recently discovered that the mast is not perpendicular to the table, making it very difficult to dial-in a frame. (What that might say about Mike Melton's bikes, I don't know ;-)

Anyway, I need a source for frame alignment. Anyone have any suggestion? Perhaps a shop within driving distance of Cincinnati-Columbus-Louisville-Indianapolis?

Thanks for any leads.

Aldo Ross
Middletown, Ohio