RE: [CR]Wheels for sale


Example: Framebuilding:Tony Beek

Date: Thu, 18 May 2006 23:36:55 -0500
From: "John T.Pergolizzi" <jtperry1@verizon.net>
Subject: RE: [CR]Wheels for sale
In-reply-to: <008301c67af7$8302d6f0$2f01a8c0@Perry>
To: "'John T.Pergolizzi'" <jtperry1@verizon.net>, <classicrendezvous@bikelist.org>


Wow, Wheels are SOLD!

Thanks,

John T.Pergolizzi Brooklyn, New York

-----Original Message----- From: classicrendezvous-bounces@bikelist.org [mailto:classicrendezvous-bounces@bikelist.org] On Behalf Of John T.Pergolizzi Sent: Thursday, May 18, 2006 10:51 PM To: classicrendezvous@bikelist.org Subject: [CR]Wheels for sale

Dear List, Here for your consumption is a nice set of Campagnolo Record High flange 36 hole wheels. Laced cross 4 with DT 14gauge stainless steel spokes on Mavic Module E 700C rims (stickers still there). Taking an English thread freewheel and spinning smoothly; these wheels date from the late 70's to early 80's and came off an Albert Eisentraut touring bike. The front wheel has been laced so that the valve hole is between a "small" spoke space (NOT the way I build um, but some guys like um this way. Ride is the same , but the "pump space" is smaller). Rear wheel is built with the valve in a big space.

Running straight and true, with tires and tubes but no skewers. You need to clean off the road grime and give the hubs a good polish (use "Mother's"). Very light rust on the ferrules is superficial. Rear axle spacing is for 123mm rear end.

Take um for $135.00 plus actual shipping via UPS ground.

John T.Pergolizzi
Brooklyn, New York