[CR]Mafac brakes


Example: Production Builders:Cinelli:Laser

Date: Tue, 30 May 2006 11:39:38 -0700 (PDT)
From: Tom Dalton <tom_s_dalton@yahoo.com>
To: jerrymoos@sbcglobal.net
cc: Classic Rendezvous <classicrendezvous@bikelist.org>
Subject: [CR]Mafac brakes

Jerry wrote:

If the pads slid out, the brake shoes were installed backwards - that can happen on most classic brakes, including Campy.

Jerry, Read the whole thread and hopefully you will realize that he's talking about the mounting shaft of the MAFAC pad slipping in the eye bolt allowing the whole brake shoe to slide outboard, resulting in increased lever travel, or worse.

Yes, Campy pads can slip out if installed backwards by someone who doesn't know what they are doing. The callipers will also fall off the bike if you forget the fixing nuts. It's just like with those pesky dropout adjuster screws; Campy never really intended for their designs to cater to the lowest common denominator of mechanical skills. However, if that is what appeals to you, Schwinn-approved Winneman center pulls, with the extra alloy plate to retain the shoe rubber, may be to your liking. These are often found alongside the brake safety levers, spoke protectors, and the positive retention device on the hub QR.

Tom Dalton Bethelhem, PA

---------------------------------
Sneak preview the all-new Yahoo.com. It's not radically different. Just radically better.