Re: [CR]Plastic Wheels on Old Steel Campy Record Rear?

(Example: Component Manufacturers:Campagnolo)

Date: Mon, 10 Jul 2006 04:26:07 +1200
Subject: Re: [CR]Plastic Wheels on Old Steel Campy Record Rear?
From: "Wayne Davidson" <wayne.collect@xtra.co.nz>
To: <classicrendezvous@bikelist.org>


Hi, that bottom Rd looks to have the later style 10T pullies, from the 80's not the 60's.......regards wayne davidson invers NZ........

on 10/7/06 2:17 AM, John Barron at jb@velostuf.com wrote:
> Ken-
>
> The Japanese collector study shows 2 different versions of plastic
> wheels used on Record rear- both 9 and 10 teeth:
>
> http://tinyurl.com/ewd8m
>
> John Barron
> Minneapolis
> ----- Original Message -----
> From: Huemax@aol.com
> To: jb@velostuf.com ; classicrendezvous@bikelist.org
> Sent: Saturday, July 08, 2006 10:41 PM
> Subject: Re: [CR]Plastic Wheels on Old Steel Campy Record Rear?
>
>
>
> In a message dated 7/8/06 12:38:35 PM, jb@velostuf.com writes:
>
>
>
> I have owned at least 2 NOS old steel Campy Record rear ders that
> had
> plastic pulley wheels. I've also owned NOS Record rears with steel
> wheels.
>
> Can others tell me whether they know, or believe that the later runs
> of
> steel Record rear ders came with plastic pulley wheels? (Earlier
> ones of
> that model "for sure" came with steel wheels).
>
>
>
>
> Hi John,
>
> I saw/read Japanese collector study, and I do have one set too. Campy
> DID make some
> very end productuin steel/bronz Record with plastic wheel as alloy NR,
> ca, 1968-69.
>
> Look/count number of teeh on the plastic pulley wheel, they ought to
> be "9" instead of 10.
> Also, look for the mysterious <c> marking, it ought to be on the tab
> of position adjusting
> stopper (very small). As you know, they stamped the headset about
> same time with the
> <c> marking, not before 1967 and not after 1970.
>
> Best regards,
>
> KEN TODA, High Point, NC