Re: [CR]chainring bolt washers?

(Example: Framebuilding:Paint)

Date: Fri, 22 Sep 2006 08:26:49 -0700 (PDT)
From: "Jon Brownell" <mimisugi@yahoo.com>
Subject: Re: [CR]chainring bolt washers?
To: classicrendezvous@bikelist.org
In-Reply-To: <91cd286d6bf59a5c582903143a10b853@comcast.net>


I don't know if these are what you want but a call to the Third Hand would tell you.

Cheers

http://www.thethirdhand.com/index.cgi?c=Crank/Chainring&sc=Chainring%20Spacers&id=231318432322


--- Bianca Pratorius wrote:


> I recently switched from a 52/42 set up to a 52/39
> on my Suntour
> Superbe Pro crankset. When I am on the small
> chainring and the 2nd
> smallest cog (a legal combination), I get slight
> rubbing of the chain
> against the large chainring. I am using an 8 speed
> Sram chain and new
> Stronglight chainrings. Is there a tiny washer I
> can use to space out
> the chainrings a little further from each other to
> prevent the slight
> rubbing? I think it would only have to be a tiny
> brass washer. Has
> someone done this so that I don't have to reinvent
> the wheel?
>
> Garth Libre in Miami Fl. USA (North America)
>
> _______________________________________________
> Classicrendezvous mailing list
> Classicrendezvous@bikelist.org
> http://www.bikelist.org/mailman/listinfo/classicrendezvous
>

Jon Brownell Mill Valley, CA, USA

__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ Classicrendezvous mailing list Classicrendezvous@bikelist.org http://www.bikelist.org/mailman/listinfo/classicrendezvous