Re: [CR]?options for a French rear deraillieur


Example: Production Builders:Peugeot

Date: Sat, 14 Oct 2006 06:13:10 -0700 (PDT)
From: Jerome & Elizabeth Moos <jerrymoos@sbcglobal.net>
Subject: Re: [CR]?options for a French rear deraillieur
To: gabriel l romeu <romeug@comcast.net>, "classicrendezvous@bikelist.org" <classicrendezvous@bikelist.org>
In-Reply-To: <4530DF50.7040309@comcast.net>


If you mean a Campy RD or similar, the procedure In The Day was to tap out the DO for the Campy thread. BUT..you also had to file a notch to serve a stop. I have always refused to mutiliate perfectly good Simplex DO's on this way. These best and obvious solution is to simply use a Simplex RD. The high end ones, including Criterium and SLJ always shifted much better than Campy anyway.

Regards,

Jerry Moos

Big Spring, Republica de Tejas

gabriel l romeu <romeug@comcast.net> wrote: unthreaded rear dropout on a mid 70's Peugeout PX10? is there an adaptor for a threaded deraillieur? hows about one of those hooky things for the wheel axle stays? inquiring minds want all the options. -- gabriel l romeu hoping to see a lot of CR members on Kevin's ride in central New Jersey,

50 miles due west of chesterfield new jersey, USA ± http://studiofurniture.com Ø http://journalphoto.org ±