Re: [CR]Stronglight 99 Crankset

(Example: Racing:Beryl Burton)

Date: Wed, 08 Nov 2006 14:56:23 +1100
From: "P. Lynn Miller" <lynnmiller@optusnet.com.au>
To: Classic Rendezvous <classicrendezvous@bikelist.org>
Subject: Re: [CR]Stronglight 99 Crankset
References: <20061108033524.96787.qmail@web82206.mail.mud.yahoo.com>
In-Reply-To: <20061108033524.96787.qmail@web82206.mail.mud.yahoo.com>


Jerry,

Thanks, the sets of Stronglight 99's I have seem to like an ISO better than JIS, but the key word is "seem". I have the original Stronglight BB somewhere in my parts collection, since am going to use a Phil Wood BB, I thought I would take the lazy way out and ask, since I could not find the BB without tearing the joint apart.

Thanks,

P. Lynn Miller Sydney, Australia http://www.chainringtransitauthority.com

visit the CTA blog - http://chainringtransitauthority.com/cta_blog/

Jerome & Elizabeth Moos wrote:
> The mod 99 was in production for a quite a while, at least from the
> mid-70's to the mid-80's. It spanned the change from Stronglight
> 23.35 extracator thread to 22.0 mm. It was neither ISO not JIS taper,
> but as an older Sutherlands states, JIS axles work pretty well with
> the old Stronglight cranks.
>
> Regards,
>
> Jerry Moos
>
> */"P. Lynn Miller" <lynnmiller@optusnet.com.au>/* wrote:
>
> Good day,
>
> Can anyone tell me the years of production for the Stronglight 99
> crankset? Also does anyone know if the cranks uses a JIS or ISO taper?
>
> Thanks,
>
> --
> P. Lynn Miller
> Sydney, Australia
> http://www.chainringtransitauthority.com
>
> visit the CTA blog -
>
>
> _______________________________________________
> Classicrendezvous mailing list
> Classicrendezvous@bikelist.org
> http://www.bikelist.org/mailman/listinfo/classicrendezvous