rick, that's a sweet hack, thanks for sharing.
of course, another option is to offer to sell them to those of us who are masochistic enough to try to collect 10 pitch stuff!
galen 'always looking' pewtherer san francisco, ca usa
On 12/11/06, Rick G. <reilley_1@sbcglobal.net> wrote:
>
>
> As I posted earlier, I found a set of NOS 10 pitch Dura Ace cranks. I was
> about to put them on e-bay for lack of chainrings but I found somewhat of a
> solution. Takagi made a 1/2 alloy conventional pitch sprocket in different
> sizes (usually black) called the "Takagi MX" The BCD is almost spot
> on. The chainwheel bolt holes are smaller than usual (it used a nut and
> bolt originally) but can be reamed or drilled out to accept a conventional
> chainwheel bolt. The chainrings are not too rare and can still be found.
>
> It might be a cheesy way to get around, but it's better than them
> sitting in a parts box wasting away
>
> Rick Gaytan
>
> Pitching away in 10mm in
>
> San diego, CA
>
>
> _______________________________________________
>
--
-galen