[CR]Adjusting dropout screws to the limit--Example


Example: Production Builders:Cinelli:Laser
From: <LouDeeter@aol.com>
Date: Mon, 29 May 2006 17:57:54 EDT
To: classicrendezvous@bikelist.org
Subject: [CR]Adjusting dropout screws to the limit--Example

jerrymoos@sbcglobal.net writes:

If someone were obsessive about constantly adjusting the stops, he would eventually wind up with the wheel at the front of the DOs.

_http://ebay.com/<blah> itemZ7245044873QQcategoryZ98084QQrdZ1QQcmdZViewItem_ (http://ebay.com/<blah> Z98084QQrdZ1QQcmdZViewItem)

This Masi, see above ebay link, (I had to work Masi into this discussion) belongs to Gianni Pergolizzi. Looking at adjustor screw and the rear axle, I can conclude that 1) if the Campagnolo dropout is similar then adjusting forward to the limit will not result with the wheel in front of the DO and 2) that Gianni is obsessive. Lou Deeter, Orlando FL