Re: [CR]1975 Peugeot PR10 Geometry


Example: Component Manufacturers:Chater-Lea

From: DTSHIFTER@aol.com
Date: Thu, 18 May 2006 18:07:50 EDT
Subject: Re: [CR]1975 Peugeot PR10 Geometry
To: jerrymoos@sbcglobal.net, lynnmiller@optusnet.com.au, classicrendezvous@bikelist.org


Greetings Folks,

I'm just going to add to the "data base" for Peugeot geometry: I no longer have my 1974 but it measured 23" (58cm with my tape measure) seat tube, with a top tube just slightly shorter (57cm); the seat tube angle was 72o and the head tube angle was 74o.

I also have a late 60's PX-10 as well as a '77 PY-10 and an early 80's Super Competition, none of which have been measured (by me). I'll do that sometime in the near future........

Cheers,

Chuck Brooks
Malta, NY