Re: [CR]Campagnolo tools (Ed Granger)

(Example: Framebuilders:Brian Baylis)

From: <Philcycles@aol.com>
Date: Fri, 5 Jan 2007 12:30:47 EST
Subject: Re: [CR]Campagnolo tools (Ed Granger)
To: classicrendezvous@bikelist.org


In a message dated 1/5/07 9:13:37 AM, freesound@comcast.net writes:
>I find the part of building that is most sensitive to tools (based on what
>I've done, which is not the full spectrum) is adjusting and setting the
>BB. I don't have a good tool for the lockring or for the movable cup.
> An old Park lockring tool slips off, a Campy combination lockring/headset
>(or is it pedal?) wrench slips off, and I think I'd like to try the VAR
>tool for lockrings. The Campy pinwrench seems pretty good, but if the
>service stand doesn't hold the BB very steady, both it and the ring wrench
>fall off while I'm trying to focus on tightness v. play.
> I have both Sugino and Campy BB tool sets between the two I've been able to service every BB I've run into. Phil Brown Multi tooled in San Rafael, Calif.