[CR]Moser frame building history explained

(Example: Events:Cirque du Cyclisme:2002)

From: "Tim Potter" <bikes@msu.edu>
To: <classicrendezvous@bikelist.org>
Date: Tue, 23 Jan 2007 11:58:17 -0500
Organization: MSU Bikes Service Ctr
Thread-Index: Acc/D63NeD9Qj+opSnyZ0WzLtQnHvw==
Subject: [CR]Moser frame building history explained

I received the following from Greg at Moser Cycles USA which nicely explains Moser frame building history for reference.

================

From: Todd Kreider [mailto:info@mosercycles.com]

Sent: Monday, January 22, 2007 10:42 AM

To: MSU Bike Project

Subject: RE: Looking for information on early '80s Moser frames

Tim, this bike is nice! Looks in good condition and very typical for the

period. The history of Moser and DeRosa goes until 1978 when Moser wanted

his name on the DeRosa frame and Ugo refused. Moser then hired Antonio

Brandazzi away from Bottecchia to start his frame shop in Trento thus the

birth of Cicli F. Moser. Without knowing the tubing this could be one of

several models. They built lugged steel frames using SL, Cro-Mor and Aelle

tubing. The SL frame was called the Professional and this was the model to

have before they started fillet brazed Leader AX frames in 1988.

Moser has never responded to e-mail about older bikes but you can try:

info@ciclimoser.it. Marco speaks English, Francesco does not.

Greg @ Moser Cycles 717 560 2832

-----Original Message-----

From: MSU Bike Project [mailto:bikes@msu.edu]

Sent: Sat 1/20/2007 6:21 PM

To: Todd Kreider

Cc: bikes@msu.edu

Subject: Looking for information on early '80s Moser frames

Hello,

I recently purchased a Francesco Moser from the early '80s and am

having a very difficult time getting any information on it. I would

be very grateful if you could provide any information you might have

on these framesets of that period.

I've read that De Rosa was making frames for Moser in the mid-70's;

do you know if De Rosa continued building frames for Moser in the early

'80s?

This particular Moser has no serial number anywhere on it that I can

locate. Was this common, or is the number in some obscure location?

Finally, would you happen to know what tubing these framesets were

made with? There is a very small bit of a Columbus decal in the

usual spot, but it's impossible to tell the tubing type.

Here are some photos of the bike for reference:

http://www.potterspix.com/biking/moser/

I'd be more than happy to pay some fee for this information if

necessary. Also, if there's any chance to purchase historical

materials on the FM bikes of that era I would love to know about

anything that might be available.

Many thanks,

Tim Potter MSU Bikes

Bessey Hall & Red Cedar River Tr.

517/432-3400

Email: bikes@msu.edu

http://www.bikes.msu.edu http://www.bikes.msu.edu/

-------------------------------------------------------------------------

"Helping more people discover the joys of

bicycling on the MSU Campus"