RE: [CR]Is Cyclone Kool Enough for Weigle?

(Example: Framebuilding:Norris Lockley)

Date: Sat, 9 Jun 2007 11:44:50 -0700 (PDT)
From: Jerome & Elizabeth Moos <jerrymoos@sbcglobal.net>
Subject: RE: [CR]Is Cyclone Kool Enough for Weigle?
To: schoeller@comcast.net
In-Reply-To: <1181408795.14246.56.camel@razor.schoeller.ne.mediaone.net>
cc: classicrendezvous@bikelist.org

Don't think I've ever seen SunTour bars and stem, and I don't have any. I'll use Nitto bars and a Nitto stem or Dura-Aced badged Nitto stem.

Regards,

Jerry Moos Big Spring, TX

Richard Schoeller <schoeller@comcast.net> wrote: I would bet that the stems and maybe the seatposts were SR. I know that previous to Suntour branding SR was the stem used on Suntour equiped bikes. Some of the Suntour equiped bikes in the 1970s had Taihei seatposts, I don't know how long that continued.

On Sat, 2007-06-09 at 08:23 -0700, Jerome & Elizabeth Moos wrote:
> Actually, it's maybe not exactly a matched set, as there were evidently about 4 generations of Cyclone. I think maybe the first generation was derailleurs and shifters only, with cranks, brakes, hubs, pedals coming later. I assume Suntour themselves probably only made the derailleurs and shifters, and maybe the seatpost. Most likely cranks would be made by Sugino, brakes by DiaCompe, hubs by Sanshin, pedals by MKS, HS more than likely by Tange.
>
> So I probably have mixed generations of Cyclone, but it's all marked SunTour and Cyclone. One nice thing about American frames (or Japanese frames like 3Rensho) is you get a chance to use all those great Japanese components, especially the non-Shimano ones, that don't seem quite right on a European frame. Since quality American components are limited, any nationality of components seems fair game on an American frame.
>
> Regards,
>
> Jerry Moos
> Big Spring, TX
>
>
>
>
>
>
> "kyle-chrisbrooks@earthlink.net" wrote:
> sorry -- my previous post got sent while I was still typing it. Here's the
> rest of it.
>
> I think the cyclone parts are very nice -- good finish, good quality, great
> shifting, and nice-looking parts. And you have a matched set, which isn't
> that common to come across. Most bikes built at that time with Cyclone used
> the "mixed" group that included the Dia Compe brakes and Sugino crank -- of
> course, the Cyclone brakes were made by Dia Compe, and the Cyclone crank
> was made by Sugino -- but the SunTour branded parts must have cost a little
> more or else I assume you'd have seen more bikes equipped that way. One
> thing I'm pretty sure of, though -- I don't know about the earlier
> versions, but with the later ones (the smoother, more aero-looking parts),
> I'm almost certain that Superbe Pro is lighter. Then again, the earlier
> parts were just called "Superbe" without the "Pro." Maybe those were
> heavier than Cyclone? Either way, though, the difference in weight between
> those two groups couldn't be too significant. That's a long way of saying
> "go for it" since you asked for an opinion on the subject.
>
> Kyle Brooks
> Akron, OH (temporarily on hiatus in Greensboro NC)
>
> > [Original Message]
> > From: Jerome & Elizabeth Moos
> > To:
> > Date: 6/9/2007 12:14:35 AM
> > Subject: [CR]Is Cyclone Kool Enough for Weigle?
> >
> > Recently unpacked my early 80's (I think) Peter Weigle frame that I had
> boxed up for a move 1 1/2 years ago. I had bought this from Mark Poore and
> he delivered to Larz a couple of years ago.
> >
> > This bike has a spectacular multicolor (at least six colors) fade paint
> job. It also has an unusual combination of lugs and fillet brazing.
> >
> > I'm thinking it's high time I built it up. But now the question
> arises, with what?
> >
> > Since it has SunTour vertical DO's, SunTour seems appropriate. Plus I
> really like SunTour, but somehow never feel right about putting Japanese
> parts on a European frame. But, since there is a limited number of quality
> US parts, just about anything seems fair game for an American frame.
> >
> > My first thought was Superbe or Superbe Pro. However, I find my
> Superbe inventory is pretty much limited to derailleurs and brakes. Also,
> I don't have a Superbe brazeon FD, which this frame requires.
> >
> > On the other hand, I find I have pretty much a complete Cyclone gruppo,
> including a brazeon FD, track pedals, and the realtively rarely seen
> Cyclone crankset.
> >
> > One thing I had read here was that Cyclone was lighter than any version
> of Superbe, so it might be thought of as the "Japanese Jubillee"
> >
> > So, what say you? Is Cyclone kool enough for a Weigle, or is it
> sacrilege to even consider anything short of Superbe?
> >
> > Maybe J.P. himself has an opinion on this.
> >
> > Regards,
> >
> > Jerry Moos
> > Big Spring, TX
> >
> >
> >
> >
> >
> >
> >
> > _______________________________________________
>
>
>
>
>
> _______________________________________________

--
Dick Schoeller
mailto:schoeller@comcast.net
http://schoeller.hsd1.ma.comcast.net/
781.449.5476