[CR]Ofmega/ Avocet Triple Cranks - the saga continues

(Example: Humor)

Date: Mon, 25 Jun 2007 20:29:35 -0700 (PDT)
From: Jerome & Elizabeth Moos <jerrymoos@sbcglobal.net>
To: classicrendezvous@bikelist.org
In-Reply-To: <788502.63964.qm@web82209.mail.mud.yahoo.com>
Subject: [CR]Ofmega/ Avocet Triple Cranks - the saga continues

Today I received several 74 BCD chainrings from two different list members. All are, I think, SR brand. I also managed to dig out of the dark recesses of my stash a set of Avocet inner ring attachment bolts.

However, I discovered another complication. The attachment bolts will not go all the way through the chainring holes. That is, the Avocet bolts have a shoulder between the bolt head and the section which threads into the arms. This shoulder is a larger diameter than the holes in the SR rings, so will keep the bolts from going through the chainrings all the way to the bolt heads. Either the SR rings are nonstandard, which I doubt, or the Avocet inner rings had larger than standard bolt holes, which I strongly suspect is the case. Anyone remember this stuff for sure?

Given the probable scarcity of actual Avocet/Ofmega inner rings, it looks like the best course of action will be to drill out the SR ring bolt holes. That will leave a bit less metal than I'd Ideally like, but I think it will be OK.

Regards,

Jerry Moos
Big Spring, TX