[CR]frame saver


From: "Anthony Mezzatesta" <mezzbike1@zoominternet.net>
To: "Bianca Pratorius" <biankita@comcast.net>
Date: Tue, 26 Jun 2007 22:52:21 -0400
cc: classicrendezvous@bikelist.org
Subject: [CR]frame saver

Hi Bianca,
      The builder "Gios" most likely drilled a very small hole in each tube and after the total braze, he went back and brazed a drop of silver or brass onto the holes and polished smooth.
      A good portion of us do that, the theory is if air can't get in neither can water and if either of them can't get in than there will be no rust. so, don't drill any holes, if you can get some Frame Saver spray it into the open tubes (seat tube, chain stays, down tube, head tube ) and ride like the wind.