and EAI makes a nice (and probably the most affordable) version with the
italian threading...
--->
http://sheldonbrown.com/
andrei padlowski glen ridge, nj
On 9/11/07, jeffrey piwonka <jmpiwonka@yahoo.com> wrote:
>
> phil wood lockrings are campy thread pitch and size.
>
> jeff piwonka
> austin texas usa
>
> --- greg piwonka <paseone@hotmail.com> wrote:
>
> > i think you can get phil wood track lockrings with a
> > campy thread.
> > greg piwonka
> > austin tx
> >
> > >From: "CyclArt Shop" <shop@cyclart.com>
> > >Reply-To: shop@cyclart.com
> > >To: "Wayne Davidson" <wayne.collect@xtra.co.nz>,"CR
> > List"
> > ><classicrendezvous@bikelist.org>
> > >Subject: RE: [CR]track hub lockring size required
> > >Date: Tue, 11 Sep 2007 14:59:00 -0700
> > >
> > >Wayne,
> > >If the lockring on your Campagnolo hub was a BB
> > lockring, then it was a
> > >road
> > >hub, not a track hub. English BB and freewheel
> > thread is the same (1.37" x
> > >24 tpi.) Track lockrings are always smaller than
> > the cog thread, and ALWAYS
> > >left-hand threaded.
> > >
> > >Campagnolo uses their own lockring thread, and I
> > don't believe anyone else
> > >uses it. It is 1.32" x 24tpi LH thread.
> > >
> > >Most track hubs are English thread. They use a
> > 1.29" x 24 tpi LH threaded
> > >lockring.
> > >
> > >French are 33 x 1.0mm LH thread.
> > >
> > >If you can't find a track hub but want to ride a
> > fixed gear, you can often
> > >fit a BB lockring over a cog on a freewheel hub,
> > and respace the axle to
> > >the
> > >right chainline. Loctite or equiv. is a good idea
> > with this setup, and so
> > >is
> > >a rear brake. It seems to work ok as long as you
> > don't try to stop with
> > >pedal pressure. If you spin off your cog doing so,
> > you will be in a world
> > >of
> > >hurt.
> > >
> > >Greg Reiche
> > >CyclArt
> > >Vista, CA USA
> > >shop@cyclart.com
> > >www.cyclart.com
> > >http://ebay.com/<blah>
> > >
> > >-----Original Message-----
> > >From: classicrendezvous-bounces@bikelist.org
> > >[mailto:classicrendezvous-bounces@bikelist.org]On
> > Behalf Of Wayne
> > >Davidson
> > >Sent: Tuesday, September 11, 2007 12:16 PM
> > >To: CR List
> > >Subject: [CR]track hub lockring size required
> > >
> > >
> > >Hi all, I recently bought a Campagnolo rear track
> > hub, the lockring was a
> > >BB
> > >lockring. I'm not in need of another one, and
> > dammed if I can find a
> > >lockring that thread in my collection. Then I
> > recently ended up with a
> > >Sunshine hub, looks just the same as a Campagnolo,
> > without a lockring, so
> > >this time I measured the thing, well now I see a
> > probelm, its 33mm in
> > >diameter, what BB uses that size?, I've checked
> > archives with no luck, just
> > >looking for a cheaper version than the Campagnolo
> > lockring for my
> > >fixie.......regards wayne davidson Invercargill
> > NZ...........
> > >
> > >_______________________________________________
> > >Classicrendezvous mailing list
> > >Classicrendezvous@bikelist.org
> >
> >http://www.bikelist.org/mailman/listinfo/classicrendezvous
> > >
> > >--
> > >I am using the free version of SPAMfighter for
> > private users.
> > >It has removed 3890 spam emails to date.
> > >Paying users do not have this message in their
> > emails.
> > >Get the free SPAMfighter here:
> > http://www.spamfighter.com/
> > >
> > >
> > >
> > >_______________________________________________
> > >Classicrendezvous mailing list
> > >Classicrendezvous@bikelist.org
> >
> >http://www.bikelist.org/mailman/listinfo/classicrendezvous
> >
> >
> _________________________________________________________________
> > A place for moms to take a break!
> > http://www.reallivemoms.com?ocid=TXT_TAGHM&loc=us
> >
> > _______________________________________________
> > Classicrendezvous mailing list
> > Classicrendezvous@bikelist.org
> >
> http://www.bikelist.org/
> >
>
> _______________________________________________
> Classicrendezvous mailing list
> Classicrendezvous@bikelist.org
> http://www.bikelist.org/
>
_______________________________________________
Classicrendezvous mailing list
Classicrendezvous@bikelist.org
http://www.bikelist.org/