[CR]48-tooth Chainring Wanted

(Example: Framebuilders:Mario Confente)

To: classic rendezvous <Classicrendezvous@bikelist.org>
From: "Mark Fulton" <markfulton5@mac.com>
Date: Mon, 1 Oct 2007 19:31:15 -0700
Subject: [CR]48-tooth Chainring Wanted

I'm gathering parts to build up the Limongi track frame I got from Mike Fravsse and I need a 48-tooth chainring x 135mm, either 3/32 or 1/8". (Campy crank.) I'd consider something between 46 and 50. I already have a 42-tooth.

Thanks for your help.


Now then, here's an aside: I bought a Colnago Super frameset as an "organ donor" for the Limongi. Before you get your shorts in a bunch about that, the Colnago's down tube is terribly kinked. I've already salvaged the Campy headset and bottom bracket. But I mostly got it for the fork so I can ride the track bike on the street with a front brake. It's a very nice fork with exactly the same dimensions, including rake, as the Super Vitus track fork that came with the Limongi. But I have a question about the fork. The little club thingies\u2014I think that's the proper term\u2014on top of the fork crown are

raised not engraved. Is that standard? I don't remember seeing them, but I haven't paid much attention to Colnago fork crowns.

Mark Fulton
Redwood City