Re: [CR]Campy seatpost binder bolts?

(Example: Production Builders:Cinelli)

Date: Wed, 24 Oct 2007 11:35:45 -0700 (PDT)
From: "sandranian" <>
Subject: Re: [CR]Campy seatpost binder bolts?
To: John Barry <>, Classic Rendezvous <>
In-Reply-To: <>

The bolts came in different diameters as well.

Stephan Andranian Costa Mesa, CA

John Barry <> wrote: Doug,

I know of bolts that come in lengths of 22mm and 17mm. There may be other lengths as well. I believe loose screws carries generic bolts that would likely fit in these lengths, if you can't find one that's more suitable (vintage).

Good luck,

John Barry
Mechanicsburg, PA, USA

--- Doug Van Cleve wrote:

> Howdy folks.
> I am putting together a KOF (I think) frameset, an
> older Merckx MX Leader
> and have run into a snag on the seatpost binder
> bolt. I assumed it would
> have been Campy so I ordered one, but it doesn't
> really work. First off the
> washer on the bolt side doesn't fit into the recess
> in the seat lug. No
> biggie I guess. Turns out the bolt bottoms out on
> the nut before really
> clamping the seatpost. Did these bolts come in
> different sizes, or maybe
> Campy changed them over time? Anybody know? Thanks
> in advance :^)
> Doug Van Cleve
> Chandler, AZ USA
> _______________________________________________
> Classicrendezvous mailing list

__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around _______________________________________________ Classicrendezvous mailing list


This E-mail is covered by the Electronic Communications Privacy Act, 18 U.S.C. ยงยง 2510-2521 and is legally privileged. This information is confidential information and is intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.

_______________________________________________ Classicrendezvous mailing list