Re: [CR]Andrew Hauge (was: The maker of that Confente binder bolt...)

(Example: Racing:Jean Robic)

References: <8CA123CF5B534CF-184-4659@Webmail-mg20.sysops.aol.com> <476FC7FF.4010805@os2.dhs.org>
To: john@os2.dhs.org, classicrendezvous@bikelist.org
Subject: Re: [CR]Andrew Hauge (was: The maker of that Confente binder bolt...)
Date: Mon, 24 Dec 2007 12:03:55 -0500
In-Reply-To: <476FC7FF.4010805@os2.dhs.org>
From: "Dale Brown" <oroboyz@aol.com>


John Thompson wrote: << Ask and ye shall receive: http://www.os2.dhs.org/~john/catalogs/hauge.pdf >>

Awesome!

I had forgotten about the fork crowns with the recessed area on top to receive a customized insert.... Never saw anyone actually use those, but they seemed cool....

Thanks John!

Dale Brown Greensboro, North Carolina USA

-----Original Message----- From: John Thompson <john@os2.dhs.org> To: classicrendezvous@bikelist.org Sent: Mon, 24 Dec 2007 9:53 am Subject: [CR]Andrew Hauge (was: The maker of that Confente binder bolt...)

Dale Brown wrote:
> If I recall correctly (and that is up for debate...) that seat binder
> bolt Ha s a distinctive look, rather "round shouldered", and was made
> for Confente by a Welshman named Alex (ander?) Hague who had a
> lively accessories business in the late 1970s early 80s...
>
> You could order all sorts of neat things from this concern: frame
> building bits with your name engraved, tandem elliptical bb shells,
> custom seat binder bolts, frame building jigs, Rann trailers, etc.,
> etc. I bet some CR list member still has a copy of his catalog?

Ask and ye shall receive:

http://www.os2.dhs.org/~john/catalogs/hauge.pdf

--
John Thompson (john@os2.dhs.org)
Appleton WI USA