Re: re: [CR]Simplex Tour de France and Competition set-up instructions

(Example: Racing:Jacques Boyer)

Date: Wed, 02 May 2007 15:00:01 +0000 (GMT)
From: <joebz@optonline.net>
Subject: Re: re: [CR]Simplex Tour de France and Competition set-up instructions
In-reply-to: <002a01c78cc0$b6f55790$6b01a8c0@PC9960>
To: classicrendezvous@bikelist.org
References: <002a01c78cc0$b6f55790$6b01a8c0@PC9960>


This write up is a nice start. It does not point out that adjusting the chainlength, upper tension spring and lower tension spring is iterative, with the variation from the front chainwheels coming in to boot. They all affect each other and you need to fiddle. Properly adjusting one of these derailleurs from scratch takes a good 45 minutes if not more. It is also likely that your existing adjustment is less than optimum if you haven't gone through the whole exercise. On a limited range freewheel, when you get it right, these derailleurs shift wonderfully.

Joe Bender-Zanoni
Great Notch, NJ


----- Original Message -----
From: "Peter Brueggeman"
Date: Wed, 02 May 2007 09:50:00 -0000
Subject: re: [CR]Simplex Tour de France and Competition set-up instructions
To: classicrendezvous@bikelist.org


> Re " ....setting up the 1950s Simplex Tour de France and

\r?\n> Competition

\r?\n> derailleurs?"

\r?\n>

\r?\n> the Classic Lightweights UK site recently added advice on this

\r?\n>

\r?\n> see http://www.classiclightweights.co.uk/simplex_adjustment.html

\r?\n>

\r?\n> Peter B

\r?\n> ......................................

\r?\n> Peter Brueggeman

\r?\n> La Jolla California USA

\r?\n> pbrueggeman(AT)ucsd.edu