Re: [CR]CLB INVERSE LEVER MOUNTING?

(Example: Component Manufacturers:Cinelli)

Date: Sun, 3 Jun 2007 21:59:04 -0400
From: "coel canth" <coelcanth@gmail.com>
To: "joel metz" <magpie@blackbirdsf.org>
Subject: Re: [CR]CLB INVERSE LEVER MOUNTING?
In-Reply-To: <a06200718c28909f117e5@10.0.1.2>
References: <280756.21386.qm@web53802.mail.re2.yahoo.com>
cc: classicrendezvous@bikelist.org
cc: classicrendezvous@bikelist.org

here is a picture of the nitto bars i am in the process of modifying to work with these very same levers:

http://www.flickr.com/photos/96473459@N00/528870742/

the screw is countersunk so the grips will slide over it.. i still haven't decided whether i will also drill the grip to match (so the lever can be removed without destroying the cork) it is tempting to keep the mechanism concealed though.. don't forget you will also need to drill another hole for the cable to exit...

Andrei Padlowski Glen Ridge, NJ

On 6/3/07, joel metz <magpie@blackbirdsf.org> wrote:
> theres a screw that threads into the top side of the plug that fits
> into the bars (you can just barely see it in those photos). drill a
> hole in the ends of the bars to match, bolt the levers to the bars
> using that screw through those holes. voila!
>
> -joel
>
> At 17:01 -0700 06.03.2007, scott davis wrote:
> >Hey group, how are these brake levers mounted? Is another part
> >necessary? Thanks
> > Here's a foto link to an old ebay auction:
> >
> >http://ebay.com/<blah>
> >
> > Scott Davis Twin Cities, MN USA
> > http://www.sdbicyclegarage.com
> >
> >
> >---------------------------------
> >Looking for a deal? Find great prices on flights and hotels with
> >Yahoo! FareChase.
> >
> >_______________________________________________
>
>
> --
> joel metz : magpie@blackbirdsf.org : http://www.blackbirdsf.org/
> bike messengers worldwide : ifbma : http://www.messengers.org/
> magpie messenger collective http://www.magpiemessenger.com/
> portland, oregon
> ==
> i know what innocence looks like - and it wasn't there,
> after she got that bicycle...