At 11:36 PM 7/31/2007, Jerome & Elizabeth Moos wrote:
> Does anyone have any firsthand information about the
> compatibility of Campy 3-hole rings with TA, Stronglight or Nervar arms?
http://bikesmithdesign.com/temp/campi-stronglight-3pin.jpg shows
36-46 Stronglight rings on steel Campi 3 pin arms. I don't remember
what bolts I used, but the are longer than Campi. I also have a set
of alloy 3 pin Campi arms. and the original chainrings from both
sets. The crankarm/chainring interface is the same 9mm hole.
If I didn't have the bolts, and was mixing brands, (so originality
wasn't an issue) I'd get out my trusty 10mm drill bit and make the
rings and arms compatible with modern 10mm bolts.