Re: [CR] FOR SALE: Spence Wolf reproduction brake booster plates for MAFAC calipers

(Example: Framebuilders:Cecil Behringer)

Date: Sun, 13 Jan 2008 17:43:16 -0500
From: "yavo" <fyavorsky@gmail.com>
To: "R.S. Broderick" <rsb000@hotmail.com>
Subject: Re: [CR] FOR SALE: Spence Wolf reproduction brake booster plates for MAFAC calipers
In-Reply-To: <BAY109-W26CE41C30EB9E4EF0AF12C9C450@phx.gbl>
References:
cc: classicrendezvous@bikelist.org

FYI, here's a photo of the "original" Brake Boosters but on Universal centerpulls on my Holdsworth Mistral touring bike: http://twistcomm.com/Bikes/HoldsworthMistral/source/p1010019.htm

This frame was set up in the Spence Wolf style but from Shaw's Lightweight Cycles in CA.

TA Cranks, Rally rear. Tied and soldered spokes on a 40 hole Phil hub with Super Champion rims and some other interesting period features like a Blackburn front rack and Bleumels mudguards.

Regards, Fred Yavorsky Jenkintown, PA

On Jan 13, 2008 1:57 PM, R.S. Broderick <rsb000@hotmail.com> wrote:
>
>
> Now available on a one time offer only basis to CR List members,
> reproducti
> ons of those nifty brake booster plates pioneered by Spence Wolf of
> Cuperti
> no Bike Shop fame (...if you would care for a bit of a history lesson on
> th
> ese, please check the CR List archives using the search keywords "Spence"
> a
> nd "Wolf" and "MAFAC"). These exacting reproductions are based upon those
> l
> ast originals of my own and may be seen using either one of the following
> l
> inks:
>
> http://www.wooljersey.com/gallery/broderir/For-Sale/MAFAC-booster-plate /
>
> ... or ...
>
> http://tinyurl.com/29o7st
>
> The brake bridges being offered herein will fit MAFAC Competition, 2000,
> Ra
> cer, "S", and GT models of center pull calipers, include detailed
> instructi
> ons and all necessary mounting hardware crafted from high grade stainless
> s
> teel, are a straightforward "bolt on" application requiring little or no
> te
> chnical expertise, and will vastly improve overall braking performance
> whil
> e virtually eliminating that notorious squeal often associated with these
> t
> ypes of brakes.
>
> This project was originally undertaken to satisfy my own desire to obtain
> a
> few sets of these booster plates, but only after searching in vain for
> nic
> e originals over the course of several years. Having resigned myself to g o
> so far as having them re-engineered, I was also very careful to have
> separa
> te versions made to accommodate both the standard 62 mm sized calipers as
> w
> ell as the 63 mm variety having an adjustable center bridge (...Spence's
> originals were all produced with 62 mm centers and you had to use a rat
> tai
> led file to elongate those holes a bit in order to mount them onto a 63 m m
> version caliper), so you will need to specify how many of each size you
> wis
> h to purchase. These booster plates are being offered at the special
> indivi
> dual price of $10.00 USD (...which means that you will need to order two
> fo
> r a total of $20.00 USD should you intend to mount one onto both the fron t
> and rear brake caliper of a given bike) not to include an additional $6.5 0
> USD which will be required to cover domestic shipping via USPS Priority
> Mai
> l with Delivery Confirmation for any reasonable quantity (...domestic
> insur
> ance and/or overseas postage will be provided at cost - please inquire in
> a
> dvance for rates).
>
> Interested parties should please reply directly and "OFF LIST". This offe r
> is only valid until my supply of reproduction booster plates has been
> exhau
> sted - and I have no intention of producing any more at any time in the
> fut
> ure unless someone is willing to commit to pre-paying for a minimum run o f
> 100 units at wholesale pricing. While this may be a one time offer, it is
> n
> ot necessarily limited to one set per person \u2026 HOWEVER \u2026 I again rese rv
> e the right to limit and/or reduce in quantity any order that I consider
> to
> be conspicuous consumption. In any event, I will not agree to any
> purchase
> quantities over that of five pair (...i.e. a total of ten booster plates )
> until 48 hours have passed from the time of this posting so as to allow
> tho
> se who are readers of the CR List in "digest" form to properly weigh in.
> Ot
> her than that one caveat, all inquiries will be processed on a "first com e
> / first served" basis to the very best of my abilities.
>
> I would be happy to aggregate shipping expenses on multiple items destine d
> for the same physical mailing address where practicable (...which is
> precis
> ely why I held this offer to coincide with those other vintage parts I
> subm
> itted for sale to the CR List mere minutes ago). I accept payment by
> PayPal
> , BidPay, cashier's check, money order, or well concealed cash (...mailed
> a
> t your own risk). Your satisfaction is guaranteed to the extent that you
> ar
> e welcome to return all or part of any purchase for a full refund of
> monies
> not to include shipping and/or insurance provided that said merchandise
> is
> returned to me in a reasonably timely fashion and that it is in
> substantia
> lly the same condition as when I first sent it out to you (...please let
> me
> know in advance of your intentions should this prove to be the case).
>
> Robert "yes, I'm a MAFAC brake booster myself" Broderick
>
> ...the "Frozen Flatlands" of South Dakota
>
> Sioux Falls, USA
>
>
> _________________________________________________________________
> Get the power of Windows + Web with the new Windows Live.
> http://www.windowslive.com?ocid=TXT_TAGHM_Wave2_powerofwindows_012008
>
>
> _______________________________________________
>

--
Fred Yavorsky
Jenkintown, PA
http://www.twistcomm.com/Bikes