[CR]WTB stayer / motorpacing parts

(Example: Production Builders:Frejus)

From: "Steve Birmingham" <sbirmingham@mindspring.com>
To: <classicrendezvous@bikelist.org>
Date: Thu, 6 Mar 2008 17:34:07 -0500
Thread-Index: Ach/2jBm7pdUzVa5QoqjP2hkFuOCAQ==
Subject: [CR]WTB stayer / motorpacing parts

Ok, I know there's slim chance, but I need a few parts for a bike I have that got converted somewhere along the way. It's nearly a twin to the one Eddie Albert mentioned a couple weeks ago, so 30's era parts would be best. I've decided not to do a repaint type restoration despite how rough the paint is on mine, but I would like to put it back into the proper configuration, so worn somewhat rusty or otherwise ugly parts are just fine.

I need:

1) A 24 inch front wheel, wood rim, The back hub is Baylis -Wiley and the rims are Fairbanks-Boston the same brand would be cool, but really almost anything in a 24 inch wood rim racing wheel will do.

Or just a rim, 36 hole, or just a hub or.....

2) A Major Taylor type stem especially a longer stayer type. 3) 30's track bars 4) I'm not sure what it's called, but the support rod that runs from the fork crown to the stem 5) one of the seat support rods. 6) a big inch pitch chainring. The current one is a 24 tooth Williams, which seems a bit small. I lost an auction for a 29 tooth, but I had bid a bit light since it was a Durkopp, which wouldn't be quite right (I should have gone higher) 7) A section of block chain, but only if I find the bigger ring.

As you can see, I need a lot of stuff, but anything would get it a bit closer to being right again.

Steve Birmingham
Lowell, Ma
USA